Search found 10 matches
- Wed Jul 25, 2007 6:53 pm
- Forum: Bronco Tech
- Topic: Rear driveshaft bolts again
- Replies: 5
- Views: 2285
Rear driveshaft bolts again
I have a 12mm 12 point box wrench and a 12mm 12point 1/2'' drive socket, but even with a swivel on the socket I cant get the socket on straight on all but 2 of the bolts up front by the tcase and I am afraid of stripping the heads of the bolts. I was thinking of putting a piece of pipe on the box ...
- Mon Jul 23, 2007 9:45 am
- Forum: Bronco Tech
- Topic: Rear driveshaft bolts
- Replies: 4
- Views: 1879
Rear driveshaft bolts
What size socket or wrench do I need to take the bolts out of the square flange on each end of the rear driveshaft and how hard are they to get out. THANKS FOR ANY HELP NICK
- Fri Dec 29, 2006 2:47 pm
- Forum: Bronco Tech
- Topic: Help pulling springs
- Replies: 3
- Views: 1607
Help pulling springs
OK this might be a stupid question. I'm going to a U-pull it junk yard for explorer spings, I can't take a torch or a generator in the yard. So what would be the easiest way to get all the springs off and what size wrenchs would I need? Thanks for any help on the easiest way to get these off
- Thu Nov 30, 2006 6:18 pm
- Forum: Bronco Tech
- Topic: ALUMINUM WHEELS
- Replies: 0
- Views: 1211
ALUMINUM WHEELS
Does anyone know what the width and back spacing on the stock b2 aluminum wheels is? THANKS FOR HELP
- Sat Nov 11, 2006 6:37 pm
- Forum: Bronco Tech
- Topic: Rear axle play
- Replies: 2
- Views: 1160
Rear axle play
Today I noticed that I could push my rear passenger side axle in and out about a 1/4''. What is worn to give this much play?
- Mon Oct 30, 2006 5:23 pm
- Forum: Bronco Tech
- Topic: OK how about this
- Replies: 8
- Views: 3454
It is stock
Since it is stock would I be able to keep the rear drive shaft if I went with just 2'' blocks in the rear? THANK YOU FOR YOUR REPLY
- Sun Oct 29, 2006 1:29 pm
- Forum: Bronco Tech
- Topic: OK how about this
- Replies: 8
- Views: 3454
OK how about this
If I put 3'' blocks in the back and 2'' coil spring spacers up front will I have any problems with my drive shafts, transfercase and front alignment on my 87 B2? Could someone give me an answer on this.THANKS FOR ANY HELP
- Sat Oct 28, 2006 5:21 pm
- Forum: Bronco Tech
- Topic: 2'' Body Lift or Suspension Lift
- Replies: 2
- Views: 1344
2'' Body Lift or Suspension Lift
OK I got my older brothers 87 b2 with 2.9 and automatic.I just put on the 30x9.5 tires he gave me on the stock wheels but I would like to now raise it up 2''. Can someone give me the PROS or CONS on either a Body Lift or a Suspension Lift. With a BL will the trasfercase linkage be OK and what about ...
- Mon Oct 23, 2006 7:00 am
- Forum: Bronco Tech
- Topic: tow hooks and tire size
- Replies: 3
- Views: 1359
tires and hooks
Do you mean the 30x9.5 tires and what pressure can I drop them down to. thanks for your help.
- Sun Oct 22, 2006 5:37 pm
- Forum: Bronco Tech
- Topic: tow hooks and tire size
- Replies: 3
- Views: 1359
tow hooks and tire size
My brother just passed down to me his old 87 Bronco II. I need to put a front and rear tow hooks on to go four wheeling with him. Where would be the best location for the front and I think I'm ok with mounting the rear one on the step bumper next to the tow ball. And where could I get the right tow ...