New Bronco II Owner
Posted: Sun Nov 14, 2010 7:01 pm
Been looking around here for a bit for a little fixer upper Ford, and seems I found the one I have been looking for. Thought I would ask some people with some knowledge about these, what are some things to check first, and also needed a little help.
Bought her for a couple hundred dollars, figured if I can't get it running at least I have the tires. Anyways I know it was running and driving a month ago as I bought it from a friend. He thought it needed a fuel pump as it quit firing. He replaced this and yet nothing still. I thought that maybe this could be an inertia switch problem, and to my surprise when I looked under the carpet I find the wire is taped up and not connected the inertia switch. The guy I bought it from said he never messed with that so I am assuming that it was working without being plugged in. I did reconnect to see if it would fire, and still not luck. Any advice would be helpful.
88 Bronco II
2.9 5 speed
Thanks
Bought her for a couple hundred dollars, figured if I can't get it running at least I have the tires. Anyways I know it was running and driving a month ago as I bought it from a friend. He thought it needed a fuel pump as it quit firing. He replaced this and yet nothing still. I thought that maybe this could be an inertia switch problem, and to my surprise when I looked under the carpet I find the wire is taped up and not connected the inertia switch. The guy I bought it from said he never messed with that so I am assuming that it was working without being plugged in. I did reconnect to see if it would fire, and still not luck. Any advice would be helpful.
88 Bronco II
2.9 5 speed
Thanks