BroncoII4x4.com

i took about 6" of the back of my 79 frame and i still have about 6" that im gonna take off. im gonna plate off the rest and make into a bumper and rear deck.

http://www.supermotors.org/getfile.php? ... ize&f=.jpg

try'd to link the url but it wont work if you want to take a look at what im talking about got to my web link.

had another tailgate question.
is there premarked spots to mount the pivit mounts for the tailgate? should i drill holes or weld the pivit mount's? i got a tailgate from one of Rock's buddy's but i forgot to get the hardware so im gonna pick the hardware up from a local yard this weekend.

I bolted the pivots on.... I just kinda winged it. I don't really remember anymore, but I think the width was a little tight, and I had to do a some hammer work. But my bronco was so bashed up, I really don't know if it's necessary.

cool thank's. i noticed it was a little tight when i test fitted it. hopefully i can get it installed this weekend i'll get the measurement's for ya to.

Now that I think about it, I think I lined up the body lines on the tailgate and rear quarter panels. Then stuck the pivots where they needed to be. I'll have to check when I get home.

edit:
Looking at this pic, that's what I did.

this is what it look's like for now. i just need to bolt it up next weekend.

whats size tires and rims are u running?

those are bald 35x15.5x15 swampers on 15x10 black steelies.