Difficulty Rating
- 
				marinebroncoii
 - Posts: 112
 - Joined: Sat Nov 13, 2004 11:02 am
 - Location: Jacksonville, NC
 - Contact:
 
- 
				kylebronco2
 - Posts: 35
 - Joined: Tue Nov 30, 2004 11:09 am
 - Location: V.I. British Columbia
 
- 
				marinebroncoii
 - Posts: 112
 - Joined: Sat Nov 13, 2004 11:02 am
 - Location: Jacksonville, NC
 - Contact:
 
Then just try to find either another C6 that you know was bolted to a small block or a C4 that will bolt to the NP205 T-case that you have.  A C4 will stand up to quite a bit of abuse.
			
			
									
						
							8-9" susp, 3" body lift, 39.5x16 TRXUS STS, 342 stroker, C6, NP205, D44HD mini spool-coil sprung, D60 limited slip, 4.88s
			
						the 351C has a small block bellhousing.......the 351M has a BB bellhousing.
			
			
									
						
							71 Bronco - twin sticked, full width, 2" lift, wristed arm, lots of rust...
http://www.catalystcycles.com
			
						http://www.catalystcycles.com
- 
				marinebroncoii
 - Posts: 112
 - Joined: Sat Nov 13, 2004 11:02 am
 - Location: Jacksonville, NC
 - Contact:
 
Why have I heard so many times that the 351C has a BB bell housing?  So the Windsor and Cleveland have a small block bell housing and the 351M and everything bigger had the BB?  Is it just that the 351C is a big block with a small block bell housing and people get confused.
			
			
									
						
							8-9" susp, 3" body lift, 39.5x16 TRXUS STS, 342 stroker, C6, NP205, D44HD mini spool-coil sprung, D60 limited slip, 4.88s
			
						