1989 Bronco II Fuel Line

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
DWillinFla
Posts: 1
Joined: Mon Dec 13, 2004 11:34 am

1989 Bronco II Fuel Line

Post by DWillinFla »

:confused:
I am in need of the fuel line from the pressure side of the fuel pump to the fuel filter.They are no longer available,any ideas on where to get this or how to make something that will work?
David W. Will
DBrown
Posts: 1545
Joined: Mon Apr 19, 2004 5:21 am
Location: Bowling Green, KY

Post by DBrown »

check junk yards you will have to pull it but they will let you get it for cheap.
71 Bronco - twin sticked, full width, 2" lift, wristed arm, lots of rust...

http://www.catalystcycles.com
EBSTEVE
Posts: 291
Joined: Mon Apr 26, 2004 8:10 am

Post by EBSTEVE »

I have the same fittings on my EB and you can use DOT 11 airbrake line and fittings from the local pull a part or just go hunt one down.
Also Napa sells kits for the Ford HP fuel lines but they are spendy.
HTH
Trigger_2001
Posts: 44
Joined: Fri Sep 10, 2004 9:36 am
Location: Illinois
Contact:

Post by Trigger_2001 »

The Bronc Rider (is only 15!!)
84302b2
Posts: 1
Joined: Mon Dec 13, 2004 7:29 pm

Post by 84302b2 »

there is a place here in MI called IN LINE TUBE, if they dont have it they can make it, sorry dont know there #
:wtf:
Post Reply