87 bronco won't go in to 4wd

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
keithbythebay
Posts: 2
Joined: Sun May 15, 2011 2:44 pm
Location: san francisco

87 bronco won't go in to 4wd

Post by keithbythebay »

I have a 1987 ford bronco II it as automatic 4wd that won't engage the switch lights up but nothing happins need some advise.
Top
satyner
Posts: 1
Joined: Mon May 16, 2011 5:46 pm
Location: Arkansas

Re: 87 bronco won't go in to 4wd

Post by satyner »

More than likely your 4wd switch motor. It usually takes a beating being mounted in a wide open place underneath the chasis. Its easy to replace.
Top
keithbythebay
Posts: 2
Joined: Sun May 15, 2011 2:44 pm
Location: san francisco

Re: 87 bronco won't go in to 4wd

Post by keithbythebay »

Thank you Satyner all give that a try.
Top
Post Reply

Return to “Bronco Tech”