front main seal leak

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
90b2louisiana
Posts: 3
Joined: Fri Oct 08, 2010 8:12 pm
Location: louisiana

front main seal leak

Post by 90b2louisiana »

do you know if the front main seal can be replaced by removing the balancer and pulling the seal out, or does the front engine cover have to be removed and the seal come out the back of it?
90 b2 4*4 5 spd 9500lb winch alum bumper, 31" tires
drofman
Posts: 487
Joined: Sun Dec 27, 2009 9:36 am
Location: san dirgo

Re: front main seal leak

Post by drofman »

you can do it from the outside, there was a tool to remove it and install it. it's in deep.just kinda note where it is before you remove it.
Attachments
PA090165.JPG
90b2louisiana
Posts: 3
Joined: Fri Oct 08, 2010 8:12 pm
Location: louisiana

Re: front main seal leak

Post by 90b2louisiana »

thanks for the info and the picture
90 b2 4*4 5 spd 9500lb winch alum bumper, 31" tires
Post Reply