PLEASE HELP!?!?!?!?!?!

[86broncII]

yeah i have bypassed it with no results

[Ranger Dave]

with the new harness,have you hot wired the pumps?? does it run then

[Ranger Dave]

i think by know if it were me, i would run a Keyed hot wire for the relay/pumps. but thats me

[86broncII]

no it does not

[86broncII]

ok well how would i do that and how would i get the injectors to open also?

[Ranger Dave]

you need to see if the injectors are gettin power. need a volt meter. ive never done it. find a wire in the fuze box thats hot with the key on, ahhhhh tap into the inertia switch??

[86broncII]

is it gonna hurt the injectors to stay open all the time?

[Ranger Dave]

they arent gonna stay open all the time. ya have to find out if there gettin power.

[Ranger Dave]

A noid light can be attached to the fuel injector harness in order to test for injector pulse

[86broncII]

do i have to go out and buy some noid lights or can i just use something rednecked together?

[Ranger Dave]

dont know

[86broncII]

any suggestions on the easiest way to get the injector plugs off?

[Ranger Dave]

you have to mess with the wire clip

[Ranger Dave]

http://www1.autozone.com/az/cds/en_us/0 ... oPages.htm

[86broncII]

is it on the sides?