Explorer Leaf Springs under BII's

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
orcus420
Posts: 37
Joined: Wed May 14, 2008 11:19 am

Explorer Leaf Springs under BII's

Post by orcus420 »

My BII has a small amount of rear sag and I hear the Explorer springs might be the cure. Is is true they are the same eye to eye size? Should I worry about being to high in the from swapping? I'd like to bring the rear up about an inch without making it any stiffer.
87 BII
5.0 HO
NP435 4-Speed
NP205 Transfer Case
Dana44 w/ ARB
9" Ford w/ Detroit Locker
35" Pro-Comp MT's
User avatar
Ranger Dave
Posts: 1435
Joined: Sun Oct 10, 2004 5:53 am
Location: Newbury NH
Contact:

Re: Explorer Leaf Springs under BII's

Post by Ranger Dave »

they are a direct bolt in. you just have to filp the center bolt in the xplorer ones cause the spring is under the axle on the x and on top on the B2/Ranger. it will firm it up a bit to cause a thicker spring

x springs in this one
Image
Post Reply