Page 1 of 1
eb d30/d44 ?'s
Posted: Wed Oct 19, 2005 2:38 pm
by FatMan
hey i just wanted to know really quick if the eb d30 has anything in common with the eb d44. i may have a line on a free d30 and i wanted to know it the axle shafts were the same i dont think so but wanted to make sure.
Posted: Wed Oct 19, 2005 3:11 pm
by DBrown
I think the only similarities are the axles are a direct replacement, meaning if you SAS your BII you can swap a 44 in just by bolting it in.
also if you do a disk brake upgrade it will swap over to the 44 knuckles.
Posted: Wed Oct 19, 2005 5:30 pm
by FatMan
wiil the d30 shafts fit the d44 though..
Posted: Wed Oct 19, 2005 8:52 pm
by Nobody
I'm pretty sure the stub shafts are the same. They use the 260x joint though, which is the same as stock EB 44.
I believe dana 30's are 27 spline and dana 44's are 30 spline. So the inners won't swap.
Radius arms should be the same, as are the drum brake/hub assemblies.