lift for 33's
Posted: Sun Sep 18, 2005 6:44 pm
what size lift do i need to run 33x12.50 bfg mud terrains without clearance issues on my 87 b2? right now i have 15 x 8 classic 2's and 235x75x15 with no lift and they rub when i turn.
Page 1 of 1
Posted: Sun Sep 18, 2005 9:32 pm
With no rub, 6". With rub (but you live with it) 4". You might have to trim the fenders which is way way easy to do.
Posted: Sun Sep 18, 2005 11:35 pm
or you can bend the finders a little out in the back and in a little in the front.
Posted: Mon Sep 19, 2005 3:59 am
what is the best 6" lift out there?
Posted: Mon Sep 19, 2005 4:59 am
Yeah the 4" won't quite do it. I think Skyjacker is probably still the best. Hope you have a fat wallet.
Skyjacker
Posted: Mon Sep 19, 2005 7:53 am
6 inches is the way to go. You can get a Skyjacker on blocks for about $600 from 4wheel jerks. I'm running that exact setup and all I had to do was shave a little off the corners of my fenders 
Posted: Wed Sep 21, 2005 8:32 pm
I managed to fit 34's with a three inch lift and some fender beating and trimming. I wouln't recommend anything taller without the long travel kit.
When i sold the rig the guy put 35's on with alot of fender trimming.
When i sold the rig the guy put 35's on with alot of fender trimming.