homebrew stock case doubler

EBSTEVE · Post by **EBSTEVE** » Thu Aug 18, 2005 9:46 am

so anyone done it? I have 2 88 t-cases one is from a Ranger and one is from a BII. I am new to the Ranger / BII stuff so I don't know what they are since they are not here until tonight, but if anyone has a link or info please post it up.

Post by **Nobody** » Thu Aug 18, 2005 10:04 am

I know Danger Ranger on Pirate is using this doubler.

Also check out this page for transfer case ID

http://www.therangerstation.com/tech_li ... Cases.html

EBSTEVE · Post by **EBSTEVE** » Thu Aug 18, 2005 10:13 am

D R is using a homebrew? I searched and did not find any info saying his is home made.
I will dig more.

Post by **Nobody** » Thu Aug 18, 2005 10:50 am

http://www.therangerstation.com/tech_li ... ltcase.htm

http://www.pirate4x4.com/forum/showthre ... ht=doubler

http://www.pirate4x4.com/forum/showthre ... ht=doubler

http://www.pirate4x4.com/forum/showthre ... ht=doubler

EBSTEVE · Post by **EBSTEVE** » Thu Aug 18, 2005 11:28 am

http://www.rrorc.com/forums/showthread. ... ge=4&pp=20
there is info on pirate but not much that seem useful

wilber · Post by **wilber** » Thu Aug 18, 2005 7:00 pm

dr is runing the t and m doubler

he has busted front 60 shafts and rear d 70 shafts, the only problems he has had with his doulber is when he didnt put lube in it and smoked the planatarys.

alx made his own doulber , but after a few runs busted the intermediate shaft. he was gonna get another made but heat treat it this time.

Bob Myers · Post by **Bob Myers** » Thu Feb 15, 2007 8:04 pm

He ended up with one of my shafts, and is yet to break it