Page 1 of 1
Any east tn members?
Posted: Sun Aug 05, 2012 12:02 am
by bigmelton
My name is Ryan and I drive a 84 bronco 2 5 speed. Its in really good shape but the hubs dont lock and the pinion is loose. Wanted to see if anybody lives out my way. I live in Maryville, Tn.
Re: Any east tn members?
Posted: Mon Aug 06, 2012 10:39 am
by jefe
Well, I used to...lived in Johnson City and Bristol back in the day......
Re: Any east tn members?
Posted: Mon Aug 06, 2012 12:39 pm
by bigmelton
Thats cool. Do you still have a b2?
Re: Any east tn members?
Posted: Mon Aug 06, 2012 4:52 pm
by jefe
My wife used to have a BII back in the day there, a very long time ago before I met her....we moved out to CA and I found another BII as sort of a suprise....so it's been my little project car for the past couple years.
Having some transmission problems right now though, and the other day I blew a heater core hose out and coolant went flying everywhere. Fun times.
Re: Any east tn members?
Posted: Tue Aug 07, 2012 6:01 am
by bigmelton
That sounds like fun. I have a question. My hubs on my dana 28 wont lock. They are manual. I took the hub apart and it seems like the plastic piece that the free/lock switch screws to is too big. The piece that the axle shaft sits in cant slide up into the hub where its splined to lock. I cant find a picture of all the parts that is inside the hub anywhere. If you can help me that would be appreciated.
Re: Any east tn members?
Posted: Tue Aug 07, 2012 9:48 am
by jefe
I've got a repair manual at home I can look through to see if it has a photo or something. I'll do my best to remember to do that.
Re: Any east tn members?
Posted: Tue Aug 07, 2012 5:39 pm
by drofman
Will this help?
Re: Any east tn members?
Posted: Tue Aug 07, 2012 7:02 pm
by bigmelton
Thanks for the pics but I have seen them before. It shows what is on the spindle but doesn't show what is inside the hub.
Re: Any east tn members?
Posted: Thu Aug 09, 2012 8:41 am
by jefe
I keep forgetting....writing myself a note right now so I can look when I get home tonight.
Re: Any east tn members?
Posted: Thu Aug 09, 2012 9:30 am
by bigmelton
Ok thanks. I just want make sure my hub has all the right parts.
Re: Any east tn members?
Posted: Thu Aug 09, 2012 9:09 pm
by jefe
hmmm. Not sure if I have anything more than Drofman did.
The first page is identical to Drofman's but it draws a bracket around certain pieces/parts labeling them as the manual locking hub.
Second page, photo at bottom is just a close up exploded view of that same thing.
The third page mentions removing the outer lock ring to access the internal parts, the spring and clutch gear.
My manual is huge too, not sure why they wouldn't have an exploded view of just those parts.
Anyways, hope this helps some.
Re: Any east tn members?
Posted: Fri Aug 10, 2012 4:19 am
by bigmelton
Thanks everyone who tried to help, but I figured it out. My hubs now lock and I have 4x4.
Re: Any east tn members?
Posted: Fri Aug 10, 2012 9:40 am
by jefe
What was the solution? For future reference of anyone who might search the topic...
Re: Any east tn members?
Posted: Sun Aug 12, 2012 8:47 am
by bigmelton
When I thought I was tearing it all the way down, I wasn't. The splined piece at the very top was stuck. I was able to knock them loose and now they slide and lock. Stupid me.