BroncoII4x4.com

I was wondering what gear ratio i should get for my b2 thats going on 33s, any iput wouls be appreciated

What motor, trans. and axles do you have? I am running 33's on my '85 with 2.8 and 5spd, D35 and 8.8 axles, am running 4.56's

I have the 2.9 5spd but dont know the axles ill have to look. Im hoping the rear is a nine inch

If you have not swapped them out, I would bet you still have the stock Dana 28 front and 7.5 rear If your ever in Enumclaw swing by my shop and check out my Bronco II's

Okay i will how do you know what aize you have, and have you ever fabricated radius arms and drop brakets?

My smaller Bronco is running axles from an Explorer Has a 6in Skyjacker class II lift on it and 33x12.5's The Big B2 is sitting on 38's, axles are from a full-size '78 Bronco. 4-linked rear - 9in with ARB waiting to be installed, front is Dana 44 that is wristed and extended radius arms up

As for brackets, I have a set for 6in lift and coils in my parts pile Am planning on building a set of extended arms soon, have the pieces just need to build them

What kind of material are you usuing for the radius arms? And brackets?

4:56's will give ya a 3:80 final ratio

For the arm extension I am either gonna use some 2x2 square or 2in dia DOM with .25in wall. As for the drops I can't remeber what brand the are at the moment. The coils are red, but having trouble remebering what color the drops are.

Thanks im gonna go with the 4.56s im just gonna get a 9 inch rear end first

And okay sounds good im gonna work on mine if you know amyone selling a nine inch rear end let me know please

Had one from an early Bronco, sold it a few months ago.
Still have the Early Bronco '77 Dana 44 with disc brake

And thats for the rear?

NO, I sold the 9in rear, still have the front Dana 44

The front lift drop brackets I have are Skyjacker 6in and coils

Hey mud addict how's it going could u email me pics of your SAS, with the 78 Dana 44 working on the same on mine, gonna go the 63" leafs on the back ... Mudhog1977@yahoo.com .... Btw I'm going with 5:13 gears on mine wit 35's or 37's