BroncoII4x4.com

So I bled the system about 4 times. When i depress the clutch pedal at first it fills like it's building pressure and then goes to the floor, and the pedal will return very slowly. When the vehicle is running you can start to put it reverse and the gears will start to clash(clutch depressed or not) but won't even start to go into gears 1-5. Is this a bleeding problem or a bad slave or master cylinder? The clutch is new, but i didn't put it in and thus the need for some help. Thanks every1 happy new year.

The hydrolic clutch that ford used is VERY tricky to bleed. That may be your problem. Kinda hwrd to say but (hats where id start