Page 1 of 1
Lower Intake Manifold gasket
Posted: Sun Mar 06, 2011 1:35 pm
by jefe
I've never installed a gasket like this before, so I'm curious where I lay down some RTV sealant on this...
On the cork edges and everywhere there is blue?
Thanks for any help.
Re: Lower Intake Manifold gasket
Posted: Sun Mar 06, 2011 3:12 pm
by justinC
if its an intake gasket you really dont want to use rtv,but if you fell you must use it only on the areas that oil or coolant will pass
Re: Lower Intake Manifold gasket
Posted: Sun Mar 06, 2011 5:01 pm
by DBrown
that blue stuff works as RTV...I have put it where the cork meets the block and it works well. the cork never realy seals well
Re: Lower Intake Manifold gasket
Posted: Sun Mar 06, 2011 5:37 pm
by Ranger Dave
just use it at at the ends of the cork gaskets,see the blue around the ports, thats the sealer,HELLO
Re: Lower Intake Manifold gasket
Posted: Sun Mar 06, 2011 7:40 pm
by jefe
Ok. Good info. Thanks.