Page 1 of 1
Front Hub Conversion
Posted: Mon Apr 26, 2010 6:50 am
by Swamp-Rat-338
Hi,
I have an 84 Bronco II, It has Full Time 4X4 or Automatic Hub's, Is there a conversion kit to change it to the Lock-Out hub's?
I'm also looking for a Door & Front Fender for the driver's side, Cheap but in good shape.
Thank's,
Mike
Re: Front Hub Conversion
Posted: Tue Apr 27, 2010 2:59 am
by Ranger Dave
yes there is, find a set of hubs and parts stores have the locking nuts
Re: Front Hub Conversion
Posted: Wed Apr 28, 2010 12:59 pm
by Swamp-Rat-338
So all I need is a set of Hub's from another 84 B-II, And the locking nut's? Are you refering to the spindle/bearing nut's?
Thanks
Re: Front Hub Conversion
Posted: Wed Apr 28, 2010 2:47 pm
by Ranger Dave
yup. they dont have to be off a 84. any ranger/B2 with a D28 in it. well, if ya find a Ranger/B2 in a JY with manual hubs,you got everythinh ya need right there
Re: Front Hub Conversion
Posted: Wed Apr 28, 2010 3:06 pm
by Swamp-Rat-338
Great,
Thanks, I have another B-II I've been useing for parts, I have all parts except the spindle/bearing nut's, I guess NAPA would have them. "I Hope"
Thanks Again
Mike
Re: Front Hub Conversion
Posted: Wed Apr 28, 2010 3:13 pm
by Ranger Dave
this is from napa
