BroncoII4x4.com

anybody make it work before? i need more travel but don't have the money to link it yet. It looks like the front main eye would hit the body mount with our frames.

http://www.therangerstation.com/Maga...vy_springs.htm

want to do what was done above to the ranger. but i don't think that'll work with our frames. I need to keep my leaves out board at the moment so coming under the frame is not an option.

87xjmike wrote:
http://www.therangerstation.com/Maga...vy_springs.htm

.

- Page Not Found -

Maybe this is what you are referring to: http://www.therangerstation.com/tech_li ... _leaf.html
I have my doubts you can do this on a stock B2 because of the body, but it might be possible if you use a shorter shackle or do a body lift.
You will also notice this fellow has had the springs re arched which moved the eyes closer together.
I don't understand the problem you refer to with keeping the springs out board of the frame, B2 frames are near the same width full length, anyway mine is.

Ray

I looked at this as well, even got a set of chevy springs, then seen how it was going to hit the body mount. I though of building a body mount/spring hanger from scratch but ditched the idea when I noticed the main leaf was cracked.