Lifting question
Posted: Mon Jan 11, 2010 6:39 pm
I'm thinking of doing a 4" suspension lift and a 2" body lift and was what all needs to be changed. Like brake lines, driveline, and shifter arms thanks guys
Page 1 of 1
Re: Lifting question
Posted: Sat Jan 16, 2010 7:58 am
Been a while since I lifted mine, but as I remember I had to move a few things. I only did a 4" suspension lift though. You can either get extended brake lines or you can re-route them for the 4-inch suspension lift, I don't remember if the body lift will change anything there. Try googling around, there's a lot of information out there.
Re: Lifting question
Posted: Sun Jan 17, 2010 1:48 pm
The fuel filler tube, shifter linkage and brake lines ( from master cyl to frame ) are what you should look out for doing a body lift. I'm probably forgetting something but hope this helps. 
-Jeff
-JeffRe: Lifting question
Posted: Tue Jan 19, 2010 5:32 pm
steering drop
Re: Lifting question
Posted: Tue Jan 19, 2010 11:49 pm
i have a 4" susp. and a 3" BL on mine an all i had to change were the gas filler neck and i got some steel braided brake lines.