Page 1 of 1
Bronco II and Mustang II ... 2.8L
Posted: Sun Aug 02, 2009 7:32 pm
by rustycobraii
Hi everyone. I have a 85 Bronco II and a 77 Mustang Cobra II, both with 2.8L Ford engines. I was wondering if anyone knew if these are the same, and are interchangeable. Thanks!!
Re: Bronco II and Mustang II ... 2.8L
Posted: Mon Aug 03, 2009 9:17 am
by Ranger Dave
a 2.8 is a 2.8
Re: Bronco II and Mustang II ... 2.8L
Posted: Mon Aug 03, 2009 4:02 pm
by rustycobraii
So it will bolt in then? I just know from experience that not all motors are the same because of size. Take for example, Honda. You have the 1.6L Motor. There are more than one type, and they wont all bolt right in.
And all intakes and everything are the same? And would a 4.0 drop in as well, as I have read that they are the same tranny bolt pattern
Re: Bronco II and Mustang II ... 2.8L
Posted: Mon Aug 03, 2009 4:42 pm
by Ranger Dave
rustycobraii wrote: Take for example, Honda. You have the 1.6L Motor. There are more than one type, and they wont all bolt right in.
well thats honda.
2.8,2.9 and the 4.0 all share the same bell bolt pattern.
Re: Bronco II and Mustang II ... 2.8L
Posted: Wed Jan 13, 2010 8:29 pm
by fbrown
From what I understand the only difference is the cam bearings are different (smaller) on the Mustang.