Page 1 of 1
problem with my auto locking hubs?
Posted: Mon Jul 27, 2009 9:29 pm
by nrandell
I was replacing brake pads and thought I'd inspect the hub. I pulled it off and it looks like everything but the cam assembly came off with it. Is this a problem? I'm attaching a pic. Thanks.
Re: problem with my auto locking hubs?
Posted: Tue Jul 28, 2009 1:15 am
by Phillippi
Its hard to tell with all the grease on the stubshaft, but it looks as it should for me (I have been up driving from Cali to Utah, so I could be wrong).
Re: problem with my auto locking hubs?
Posted: Mon Nov 02, 2009 2:31 pm
by zerospartan1987
what you have is automatic locking hubs........if you have a local autozone they will be able to print you out a complete how-to illustration on dissasembly and re-assembly(i should know i work there).......its a fairly simple thing to do, i had to take it apart when i changed out the wheel bearings and seal......
Re: problem with my auto locking hubs?
Posted: Tue Nov 03, 2009 10:05 am
by joeyy
I used to have auto locking hubs, but they didnt work right so I converted them to manual locking hubs and now my 4 wheel actually works. But if your 4 wheel actually works then I would just leave them alone. Even though its not that hard to put manual locking hubs on. Those seem to be ok.