Page 1 of 1
Explorer rims
Posted: Tue Jul 29, 2008 4:04 pm
by cdmiller
Will the stock 16 inch rims off a '03 Explorer go onto a 1990 BII ?
I have a chance to get some great AT tires but,they are on the
Explorer rims. Anybody done this or know where I can find out ?
Re: Explorer rims
Posted: Tue Jul 29, 2008 5:25 pm
by TJDukit82
http://www.ford-trucks.com/forums/42700 ... ility.html
This thread has a pretty comprehensive listing of bolt patterns for the ex b2 and ranger and it looks like you might be in luck.
Re: Explorer rims
Posted: Wed Jul 30, 2008 3:11 pm
by cdmiller
Thanks for the info,TJDukit82.I'm going to try the swap this weekend.I'm not real clear on the whole "hub" thing,but you
don't know until you try.Thanks again.
Re: Explorer rims
Posted: Wed Jul 30, 2008 5:06 pm
by TJDukit82
Well it says the hub size in the ex rims is 71.5mm and the B2 is 70.6mm so it will fit it's just not going to be a factory fit and the wheel will rest solely on the lugs which they are designed to do IMO so I'm pretty sure you are going to be just fine with a .9mm difference.