Page 1 of 1
C4 Tranny
Posted: Tue Aug 24, 2004 4:41 pm
by emg_warlock
I nead to know where i can find a c4 transmission eqipped for offroad, and with the right connection to the transfer case. Please help me out.
Posted: Wed Aug 25, 2004 5:53 am
by DBrown
take a C5 from a 84-85 BII. they are basicly the same thing and they will bolt to the V6.
Posted: Thu Aug 26, 2004 11:32 pm
by emg_warlock
No, i need to find a c4 equipped for offroad, thats bolting up to a 302, in my bronco II. not just the regular 6 cylinder.
Posted: Fri Aug 27, 2004 6:12 am
by DBrown
well, the thing is you can use the C4 bellhousing and converter on the C5 and it will bot to the 302 and your transfer case. sooooooo......if you want a built tranny you can have the C5 beefed and use the C4 bellhousing and converter. after doing this you just have motor mounts, headers, wiring, oil filter relocater, fuel pump and radiator to think about. if you are putting the 302 in an 84-85 BII with an auto and A/C you can possibly use the radiator that came in it from the factory and the factory carb with a 302 2bbl intake manifold. this will now set you at motor mounts, headers, oil filter relocater and an electric fuel pump.
Posted: Fri Aug 27, 2004 7:23 am
by Nobody
The Early Bronco is the only thing I'm aware of that came with a 4wd C4/Dana 20 combo.
Posted: Fri Aug 27, 2004 7:52 am
by DBrown
I am confused??? what are you wanting to run?
Posted: Sun Aug 29, 2004 1:12 am
by emg_warlock
I am trying to put a 302 and c4 tranny into my 1990 Bronco II, Advance Adapters has a set-up for me, but its hella expensive, what should i do? I need the right housing connection to go from my c-4 to borg warner 1350 transfer case. Please supply suggestions.
Posted: Sun Aug 29, 2004 8:35 pm
by DBrown
use the C4 bellhousing and converter on the C5 and it will bot to the 302 and your transfer case