Page 1 of 1
dana 35
Posted: Thu Jul 10, 2008 3:18 pm
by BroncoOn33s
on the dana 35 swap out of the explore do i swap the whole front i-beams and chunk, axles or do you swap axles and chunk and leave my i-beams in?
Re: dana 35
Posted: Thu Jul 10, 2008 9:12 pm
by Phillippi
You unbolt the whole TTB setup in the D28 and bolt in place the TTB D35. Hook up Coils, radius arms, driveshaft, brake lines, shocks and then drive.
Re: dana 35
Posted: Fri Jul 11, 2008 7:49 am
by BroncoOn33s
about how much should i be payin for the dana35 TTB setup
Re: dana 35
Posted: Fri Jul 11, 2008 8:37 am
by TJDukit82
Well that depends I can go to my local junk yard and pull it my self for 70 bucks which is what I plan on doing as soon as I get my hands on a torch. You are going to spend alot more if you dont want to pull it yourself the great thing about this junk yard is fully loaded front or rear axles out of anything you want is 70 bucks.
Re: dana 35
Posted: Thu Jul 17, 2008 6:32 am
by greenmachine89
You can also look on craigslist, I found mine with warn hubs for 100 bucks. Most of the time people have it pulled for you already.
Re: dana 35
Posted: Sat Jul 19, 2008 2:22 pm
by vabronconut
if you do this swap try doing a write up on here so that other people can see.
Re: dana 35
Posted: Thu Sep 18, 2008 6:52 pm
by BroncoOn33s
ok