Page 1 of 1
np435
Posted: Thu May 08, 2008 8:35 pm
by rusty
anyone have pic to show how to hook up the np435 to a stock b2 hyd master/ the np435 bell housing dosent have anywhere to hook up a slave cylinder, any help would be great.
Re: np435
Posted: Fri May 09, 2008 6:42 pm
by Nobody
There are several pictures of how I made mine here.
http://www.broncoii4x4.com/v8swap/302swap.htm
I used a compression fitting to adapt the stock plastic line to the landcruiser slave.
Re: np435
Posted: Tue May 13, 2008 7:51 am
by JLove1974
I heard that a bellhousing from a 80s F-150 V8 will work and I believe it has a concentric slave with the hydraulic fitting
Re: np435
Posted: Wed May 14, 2008 11:30 am
by orcus420
I have a '87 BII with a fuel injected 5.0 HO from a '93 Stang mated to a NP435 with a bell housing and flywheel from an '86 F150, and using a slave cylinder from an '84 BII 5 3/4 inch pushrod. Works great.
87 BII
5.0 HO
NP435
NP205
Dana 44 Front
Ford 9" Rear (thinking of swapping for a Dana 60 but need to research it first)