BroncoII4x4.com

DOES ANY ONE KNOW HOW THE REAR QUARTER GLASS IS INSTALLED? SOMEONE TOLD ME IT IS URETHANED IN,OTHER PERSON TOLD ME THEY ARE BOLTED IN.ANY INFO IS APPRECIATED.

depends on what year they are early models were glued in and the newer ones were bolted in I have an 89 and mine are bolted in with a million bolts

first gen were urethaned in, second gen have a butyl caulk and ten bolts (not a million), holding each piece of glass in. first gen (good luck), insert wooden wedge, cut caulking, all the way around. have someone catch quarter glass.
second gen, remove bolts, except for top one insurance so it doesn't fall on the ground, wasting your half hour you just invested. again, pry gently with something plastic or wood, metal is liek poison to windows. cut caulking, whilst prying, and push window out as you go around. good luck. they weigh 17 lbs apiece.

rbirckhead wrote:DOES ANY ONE KNOW HOW THE REAR QUARTER GLASS IS INSTALLED? SOMEONE TOLD ME IT IS URETHANED IN,OTHER PERSON TOLD ME THEY ARE BOLTED IN.ANY INFO IS APPRECIATED.

btw, despite what you may have heard, caps lock is not NOT cruise control for cool.

Yeah, they can be glued or bolted. There was appearantly even a factory removable option.

Check out this thread

http://www.broncoii4x4.com/cgi-bin/yabb ... 060;start=

damn deuce why are you always bustin my balls

BDEUCE wrote:

rbirckhead wrote:DOES ANY ONE KNOW HOW THE REAR QUARTER GLASS IS INSTALLED? SOMEONE TOLD ME IT IS URETHANED IN,OTHER PERSON TOLD ME THEY ARE BOLTED IN.ANY INFO IS APPRECIATED.

btw, despite what you may have heard, caps lock is not NOT cruise control for cool.

X2

i can't believe that someone typing all capital letters really bothers you enough to make a comment about it you must really not have a life

its like your yelling

its like he's having a hard time figuring it out, and he comes on here to try to get some info from some guys who know about these things, and all they do is try to make themselves look big at his expense

ok