BroncoII4x4.com

well, I putting in a 2 inch body lift to make room for the 302,C4, Dana 20, and so now I have all the 2 inch blocks in and all the bolts back in but not tight and for the life of me I just can't seem to get the body lined back up with the frame. any one know of a way to do this easily?

I used a long pry bar and an extra person to pushon the body

All the ones I have measureed the rear of the body sits about 3/4" to the passenger side.

I've measured an 85, 87 (Even after the body lift) 88, 89 and a 90.

All are the same.