3.0 into 84' BII

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
Rexmann
Posts: 1
Joined: Mon Jun 26, 2006 4:37 pm
Location: Central Pa

3.0 into 84' BII

Post by Rexmann »

My 84' Bronco II has developed a lower end knock and I am no longer interested in rebuilding the 2.8 with 2bb. I have a donor Aerostar with 3.0 and I am hoping that someone might have tried this before me and I might avoid an large stumbling block(s). As DBROWN mentioned in his 4.0 swap, I will have both setting side by side. I was hoping to get some insight of mounts and/or transmision, transfer case matching. :confused:
Top
wilber
Posts: 189
Joined: Tue Apr 27, 2004 6:59 pm
Location: cleveland ohio

Post by wilber »

the 3.0 has a different bellhousing pattern so you would need that trany in a 4x4 version.
Top
Post Reply

Return to “Bronco Tech”