Page 1 of 1
84 bII carb rebuild ?
Posted: Thu May 04, 2006 4:02 pm
by ran429
So how hard are the stock 1984 b2 carbs to rebuild? it has a gutless 2.8 v6 and its an auto w/cruise.
Posted: Thu May 04, 2006 4:05 pm
by ran429
right now it will run if I keep the pedal Mashed to the floor, but if i let off it the truck wont idle.
Wifey wants it running again to go to & from work so she doesnt get her newer car dirty from all the mud at their office parkinglot.
Shes a construction companies officeworker.
Posted: Sun May 07, 2006 6:33 am
by plowboy
They are pretty simple. Just make sure the float is set right. I did mine in about an hour....and I'm stupid.
There is not a lot of parts to the kit. Make sure you have a good float, because my rebuild kit did not come with a new float.
Posted: Sun May 07, 2006 8:32 am
by ranger5.0
They are really simple to do. I has even pulled the top of while it was running to adjust the float on the trail.
Posted: Mon May 08, 2006 5:35 am
by plowboy
Ditto
Posted: Wed May 10, 2006 9:00 pm
by ran429
guess i dig into it soon then. thanks guys.