Page 1 of 1
3'' lift
Posted: Mon Mar 06, 2006 4:57 pm
by rlocke2
I HAVE A 87 BRONCO II WITH 15X8 MICKEY THOMPSON CLASSIC II'S
AND 235X75X15 BFG ALL TERRAINS. THE TIRES RUB NOW WHEN I BACK UP. I HAVE A THREE INCH BODY LIFT TO PUT ON IT, WHAT SIZE TIRES CAN I FIT WITHOUT RUBBING? I ALSO NEED ENOUGH ROOM NOT TO RUB WHEN I HAVE A LITTLE AXLE ARTICULATION. WOULD A 31X10.5 WORK OR COULD I FIT A 32X11.5?
Posted: Tue Mar 07, 2006 5:29 pm
by Dreded
3" lift
Posted: Mon Mar 20, 2006 7:57 pm
by slamdown2
you can fit 31x10.5 with no problem i did it
good lift for low bling bling
Posted: Mon Mar 20, 2006 7:59 pm
by slamdown2
got my 4" lift for $500 shipped from topguncustomz.com
Posted: Mon Mar 20, 2006 9:45 pm
by madmaxb2
you can fit 35s no lift
Posted: Wed Mar 22, 2006 8:46 pm
by ranger5.0
you have to cut fenders for the 35's though. My 31's rubbed with a 3" body lift. A few hard bumps and the tires put the front fenders where they wanted them. Check your radius arm bushings for wear.
Posted: Thu Mar 23, 2006 6:19 am
by Michael99
I have a stock 84 Bronco II and I was able to fit 31's on it without a problem. I now have p235 15 inch rims on it now because the 31's were not mud tires and I got the small mud tires from someone really cheap! He bought a vehicle and the dealer put new mud tires on it but he didnt like them and they had less than 500 miles on them and he sold them to me for 150.00. They were Maxxis Mudder Buckshots. I am really impressed with them and they go through a lot more than I thought they would be able to handle.
Posted: Thu Mar 23, 2006 9:29 pm
by ranger5.0
Appartently no one does any high speed bumps when they install the larger thatn 30X9.50 15"s.
