reusing a lift!!

Jesse · Post by **Jesse** » Mon Feb 27, 2006 9:39 pm

I recently found a bronco at a junkyard stripped of motor/tranny and windows lol but it has a fairly decent looking lift that looks to be about 6 inches. It has trailmaster shocks & red coil springs. I just had a few ?s about the lift kit itself. In the front it has a dual steering stabilizer setup but they are sticking way out in front of the 33" tires and the stabilizers themselves are dented and beat up. I was wondering if there was an easy way to move them back away from the front so they aren't as prone to damage. also, it has 33" tires and i was wondering if the stock gears will make the engine struggle any? thanx!!!!

DBrown · Post by **DBrown** » Tue Feb 28, 2006 4:08 am

it might be regeared...33's on a stock driveline would suck.

Dreded · Post by **Dreded** » Tue Feb 28, 2006 10:04 am

even with 31's on the stock 3.73 gearing its noticable most automatics came with 4.11's tho