Tire/wheel compatability

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
Reinforcements
Posts: 21
Joined: Thu Aug 18, 2005 11:30 am
Location: Aloha, OR

Post by Reinforcements »

Will 31x10.50 fit under a stock BII? How much trimming will be required and will it still look good after a 3 inch lift?
Top
ranger5.0
Posts: 743
Joined: Sat Jan 01, 2005 8:10 pm
Location: Granite Falls, Wa
Contact:
Contact ranger5.0

Post by ranger5.0 »

to much fender trimming is required to look good after the lift. When lifted 31's will beat the corners in on the rear of the front fenders when the front end takes hard hits. other than that they should be okay.
EBSteve just likes to watch me break things.:-)
420HP and 775Ft lbs Now it is time to break things.
Top
Reinforcements
Posts: 21
Joined: Thu Aug 18, 2005 11:30 am
Location: Aloha, OR

Post by Reinforcements »

well that helps me out a bunch, thankyou.
Top
Post Reply

Return to “Bronco Tech”