eb d30/d44 ?'s

FatMan · Post by **FatMan** » Wed Oct 19, 2005 2:38 pm

hey i just wanted to know really quick if the eb d30 has anything in common with the eb d44. i may have a line on a free d30 and i wanted to know it the axle shafts were the same i dont think so but wanted to make sure.

DBrown · Post by **DBrown** » Wed Oct 19, 2005 3:11 pm

I think the only similarities are the axles are a direct replacement, meaning if you SAS your BII you can swap a 44 in just by bolting it in.

also if you do a disk brake upgrade it will swap over to the 44 knuckles.

FatMan · Post by **FatMan** » Wed Oct 19, 2005 5:30 pm

wiil the d30 shafts fit the d44 though..

Post by **Nobody** » Wed Oct 19, 2005 8:52 pm

I'm pretty sure the stub shafts are the same. They use the 260x joint though, which is the same as stock EB 44.

I believe dana 30's are 27 spline and dana 44's are 30 spline. So the inners won't swap.

Radius arms should be the same, as are the drum brake/hub assemblies.