i want to go full size

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
daniel haire
Posts: 3
Joined: Sat Aug 20, 2005 4:33 pm
Location: st. augustine

i want to go full size

Post by daniel haire »

i want to put full size axles under the b2 i have a 9in for the rear but i dont no what i should use for the front and would i beable to have the same lug pattern
i dot no wut this is
Top
Rockcrawler
Posts: 588
Joined: Sun Apr 18, 2004 10:41 pm
Location: San Juan Bautista, CA
Contact:
Contact Rockcrawler

Post by Rockcrawler »

dana 44 out of a f 100 or 150.
Image
Top
FatMan
Posts: 762
Joined: Sun Apr 18, 2004 10:26 pm
Location: Mt.Vernon, WA
Contact:
Contact FatMan

Post by FatMan »

nope on lug pattern. its different d44 and 9" are 5 on 5.5. d28 and 7.5 are i believe 5 on 4.5.
Darker than your average wheeler!!!!
Top
Rockcrawler
Posts: 588
Joined: Sun Apr 18, 2004 10:41 pm
Location: San Juan Bautista, CA
Contact:
Contact Rockcrawler

Post by Rockcrawler »

yep full sizes run the large 5 lug pattern where stock they run the small lug pattern
Image
Top
Post Reply

Return to “Bronco Tech”