D35 LS

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
swampfoxforeman
Posts: 3
Joined: Wed Nov 05, 2014 4:11 pm

D35 LS

Post by swampfoxforeman »

What do I need to do to put a LSD in the D35 on my Bronco II?
User avatar
tekatlarge
Posts: 992
Joined: Tue Jan 17, 2006 8:54 am
Location: Coastal, Worshington

Re: D35 LS

Post by tekatlarge »

Basically you just pull the axles, drop the dif cover, and remove the carrier, Swap your ring gear into the lsd assembly, Re install and reset gear backlash. Then put the axles in, cover on, and add LS lube. Then go Tear it up!!!! :cool:
The Tek @ Large
Coastal,Worshington
Livin life on the dole on the Coast
swampfoxforeman
Posts: 3
Joined: Wed Nov 05, 2014 4:11 pm

Re: D35 LS

Post by swampfoxforeman »

Ok any idea of a place to get a LSD for it? I have heard something with Jeep LSD.
User avatar
tekatlarge
Posts: 992
Joined: Tue Jan 17, 2006 8:54 am
Location: Coastal, Worshington

Re: D35 LS

Post by tekatlarge »

Look in your local Pick A Part auto boneyard. Look for Explorers with the dana 35 and check the numbers on the door for LSD. They put a lot of LSD's in explorers. :cool:
The Tek @ Large
Coastal,Worshington
Livin life on the dole on the Coast
Post Reply