1989 B2

[Mason205]

hey im new here i just purchased a B2 and something just dosent seem right... is the 2.9 and a 5 speed now heres the problem when i take off its seems real hard for it to get going the back end hops like something its sliping and today i tried spining the tires and it didnt really move is that the clutch?

[Mason205]

Now when i was just driving it when i had the clutch out it was making like a static rubbing sound like the clutch was trying to engage and when i pushed it in the sound went away any help???????

[Mudhog1977]

Sounds like the clutch to me , while you're changing the clutch I'd spend the extra money and have your flywheel turned, change the pilot bearing, and the slave cylinder the slave cylinder and throwout bearing are 1 piece

[Mason205]

the clutch still have a bunch of pressure is what makes me think that it is not the clutch

[Mason205]

okay another update took it to my buddy today and he said its not my clutch its something with either the rearend or the driveshaft im thinkin the driveshaft because i went under it and the cv shaft boot at the rearend side is ripped and i can see the bearings and ive been noticing like a clicking noise

[kirkland2887]

the noise that goes away when you push the clutch still needs to be adressed. i'm willing to bet it is the release bearing. might as well put a slave cylinder and pilot bearing in as well.

[Ranger Dave]

take the rear shaft out and drive it,see if the noise goes away