im new to the bronco 2 i have a 1984 with a 2.8 L that is bad and i can get a 1986 with a 2.9 L to put in my 84 bronco 2 will the 2.9 with efi go in with and does my 84 have all the wires needed for the efi or do i need to pull more than the motor off the 86
i dont want to buy the 1986 if i cant put the motor in my 84 with out to much trouble any imfo would be really cool she is just sitting in the yard its killing me thak you
1984 2.8 to 1986 2.9
-
- Posts: 1
- Joined: Sat Aug 27, 2011 2:13 pm
- Location: palmer,alaska
- tekatlarge
- Posts: 992
- Joined: Tue Jan 17, 2006 8:54 am
- Location: Coastal, Worshington
Re: 1984 2.8 to 1986 2.9
Your best bet is use the entire harness from the 2.9.
The Tek @ Large
Coastal,Worshington
Livin life on the dole on the Coast
Coastal,Worshington
Livin life on the dole on the Coast
Re: 1984 2.8 to 1986 2.9
you will need the ECC and ECM from the 86 to use the fuel injected engine from the 86
Re: 1984 2.8 to 1986 2.9
Fuel tank, fuel pump etc. The 84 is not fuel injected and has a mechanical pump. Just pull the '86 right up next to the 84 and start the swap..