Gears?
-
- Posts: 206
- Joined: Wed Apr 13, 2011 4:16 pm
- Location: Warren,tx
Gears?
Does any know if it will hurt anything if I run a 8.8 with 4:11 gears on the back with the dana 28 with 4:10 gears on the front? I know your not supposed to run different gear ratios but I was unsure being that they are so close, not like im runnin 4:10's with 3:73's any feedback would be helpful I cant afford to buy both diffs at the same time thanx
Live to ride, ride to live, thats how I roll
Re: Gears?
they used to do this in the old days
Re: Gears?
I cant imagine that, that small of a difference will make much of a difference. Even with the front locked I would run it until it exploads (like mine did) then upgrade.
- Ranger Dave
- Posts: 1435
- Joined: Sun Oct 10, 2004 5:53 am
- Location: Newbury NH
- Contact:
-
- Posts: 206
- Joined: Wed Apr 13, 2011 4:16 pm
- Location: Warren,tx
Re: Gears?
Ford did too. Wanted the front end to pull the rear end, Worked good in sand and snow.
Re: Gears?
the ratios don't have to perfect...I think you are allowed 2% if I remember correctly.
71 Bronco - twin sticked, full width, 2" lift, wristed arm, lots of rust...
http://www.catalystcycles.com
http://www.catalystcycles.com