1985 ford bronco 2 with a np435... HELP

[joshlulu1976]

i have a 85 ford bronco 2 4x4... it orignally had a 2.8 v-6 5 speed tranny, and tranfer case... i have a 302 (carb) with a 4 speed now (np435) and 205 transfer case... was wondering if anyone has does this conversion, and if so what clutch linkage did they use?.. i would like it to be easy and cheap to do.. pictures would b great... if need my number to text me information let me know..thank you

[Mud Addict]

Yes it has been done. A buddy used to run an Ranger with that set-up. And I have a Ranger/buggy with that set-up, is a hydraulic clutch set-up. But i do not have any pics

[Ranger Dave]

from a 84ish F150, 300 six. use the bell,xternal slave and master(i think)

[joshlulu1976]

use the what, u said bell.....? bellhousing or the x.slave on the bell? i lost..lease more info

[Ranger Dave]

Bellhousing, clutch slave and master

[joshlulu1976]

Does it make a difference... the motor is a 302 (1972) and the tranny and transfer case is from a 1977 f 150.. so would a bell housing from a 300 6 interchange..? just tryin to figure stuff out.. thank you for all your help so far...

[Ranger Dave]

yes the bell will fit. you cannot use the 300 six flywheel

[Ranger Dave]

bellhousing pic. not in the pic is the bracket that holds the slave to the bell. i had a 69 302,435/205 in my 83 ranger.

[joshlulu1976]

So i have to use the 302 flywheel and clutch for the 77 transmission or the 72 motor.... if so then i need to find the bell housing.. crap...lol... ...
now another ?.. do u have to fab up a bracket or anything.. or not?.. any more information would b great...

[Ranger Dave]

go find a 84/87 F150 in a JY and grab the parts off it.. got a oil pan,motor mounts,exhaust maniflods,throttle linkage,radiator,oil filter relocation kit yet?

[Ranger Dave]

you need a 164 tooth 28oz flywheel. did the 77 motor have a std. or automatic tranny on it?? gonna need a piliot bushing if it had a auto on it.

[joshlulu1976]

k i know .... i just need to find the bellhousing... so will i have to fab up any brackets for it?

[Ranger Dave]

the bracket is on the bell

[joshlulu1976]

got it all except the remote oil filter... actually, i have that to except the wrong screw in piece.. the part that screws into the block, the lines come out and towards the steering box.. i want the one that goes to the side.. i know hard to explain...