i have a 83 b2 with the 2.8l carb and a 86 b2 with the 2.9l EFI.
both have manual trans and are 4x4
i was wondering if you could put the crankshaft from the 2.8 in the 2.9?
any help would be greatly appreciated
crankshaft question
-
bloodmaster333
- Posts: 1
- Joined: Sat Jan 22, 2011 3:57 pm
- Location: texas
crankshaft question
hey guys im new here and need a little help plz.
i have a 83 b2 with the 2.8l carb and a 86 b2 with the 2.9l EFI.
both have manual trans and are 4x4
i was wondering if you could put the crankshaft from the 2.8 in the 2.9?
any help would be greatly appreciated
i have a 83 b2 with the 2.8l carb and a 86 b2 with the 2.9l EFI.
both have manual trans and are 4x4
i was wondering if you could put the crankshaft from the 2.8 in the 2.9?
any help would be greatly appreciated
-
tekatlarge
- Posts: 992
- Joined: Tue Jan 17, 2006 8:54 am
- Location: Coastal, Worshington
Re: crankshaft question
Short answer is no.
The Tek @ Large
Coastal,Worshington
Livin life on the dole on the Coast
Coastal,Worshington
Livin life on the dole on the Coast
-
Ranger Dave
- Posts: 1435
- Joined: Sun Oct 10, 2004 5:53 am
- Location: Newbury NH
- Contact: