4 wheeldrive

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
hunterpete
Posts: 5
Joined: Mon Jun 14, 2010 10:54 am
Location: ohio

4 wheeldrive

Post by hunterpete »

Can someone tell me if the 4x4 in this 1990 Bronc II with push button on demand is vaccuum operated?? meaning if it doesn't respond there is at least the potential for the problem to be a vaccuum line failure/leak?? Thanks for any input in advance.
User avatar
Phillippi
Posts: 1193
Joined: Mon Apr 19, 2004 9:11 pm
Location: UTAH
Contact:

Re: 4 wheeldrive

Post by Phillippi »

I thought it was electrical but did suffer from connection problems that are easily fixed. Find the connectors and clean them and see if that works.
User avatar
Ranger Dave
Posts: 1435
Joined: Sun Oct 10, 2004 5:53 am
Location: Newbury NH
Contact:

Re: 4 wheeldrive

Post by Ranger Dave »

its all electric
User avatar
tekatlarge
Posts: 992
Joined: Tue Jan 17, 2006 8:54 am
Location: Coastal, Worshington

Re: 4 wheeldrive

Post by tekatlarge »

If you do not get 4wd and you have an electric Tcase 9 times out of 10 the problem is a corroded up or burn't out motor on the Tcase.
The Tek @ Large
Coastal,Worshington
Livin life on the dole on the Coast
Post Reply