tire size

[Ranger Dave]

so they will not work at all. and also where do i get that kind of drive shaft

ive never done it,i get the right springs.the drive shaft is from a 91-94 xplorer

http://rangerdave.freeforums.org/explor ... -t233.html

[Valleyboy54]

i have 35x12.5 on my bronco II. i have a 4 in suspension lift and 3 in body lift and i have lots of body clearance from the tires. the stock drive shaft with the cvc joints wont work because of the angle. the drive shaft i put on was off of an 88 ranger i cut it to size.

[john86]

so where do i find a drive shaft that is double cardan

[Ranger Dave]

2 post up

[jesse bowman]

I have a 4 1/2 in lift eagle deep dish wheel and 33x15.50x15 and i dont rub at all but trust me and them u need that drive shaft i got one made with a slip yaoc and velocity joint and it worked find it wasn't that bad the drive shaft cost 230.00