starting issue
starting issue
i just finished rebuilding my bronco put in motor, never ran when i got it. i hooked up the starter and battery cables and went to crank it, and took the key out and it still cranking by itself. put on a new relay, same thing please help dont know what to do
-
- Posts: 142
- Joined: Sat Sep 30, 2006 9:44 pm
- Location: Battle Ground, WA
- Contact:
Re: starting issue
I would check the ignition switch sounds like the guts are hanging up. if it keep going even when the engine is running then it sounds like your starter is hanging up on something. or the soleniod isn't working
1989 Bronco II 8.8 rear Dana 30 Jeep front---RIP
1991 Exploder 6 inch lift 33's---RIP
1989 Bronco II Stock with 32 BFG KM1's
1991 Exploder 6 inch lift 33's---RIP
1989 Bronco II Stock with 32 BFG KM1's
Re: starting issue
i did a frame off resto and forgot to reconnect all the grounds
,
thanks anyway

thanks anyway