dana 35
-
BroncoOn33s
- Posts: 14
- Joined: Wed Jul 02, 2008 10:41 am
dana 35
on the dana 35 swap out of the explore do i swap the whole front i-beams and chunk, axles or do you swap axles and chunk and leave my i-beams in?
Re: dana 35
You unbolt the whole TTB setup in the D28 and bolt in place the TTB D35. Hook up Coils, radius arms, driveshaft, brake lines, shocks and then drive.
-
BroncoOn33s
- Posts: 14
- Joined: Wed Jul 02, 2008 10:41 am
Re: dana 35
about how much should i be payin for the dana35 TTB setup
Re: dana 35
Well that depends I can go to my local junk yard and pull it my self for 70 bucks which is what I plan on doing as soon as I get my hands on a torch. You are going to spend alot more if you dont want to pull it yourself the great thing about this junk yard is fully loaded front or rear axles out of anything you want is 70 bucks.
And on the 8th day God created beer.
'89 Bronco II
'03 GMC Sierra Z71
'89 Bronco II
'03 GMC Sierra Z71
-
greenmachine89
- Posts: 142
- Joined: Sat Sep 30, 2006 9:44 pm
- Location: Battle Ground, WA
- Contact:
Re: dana 35
You can also look on craigslist, I found mine with warn hubs for 100 bucks. Most of the time people have it pulled for you already.
1989 Bronco II 8.8 rear Dana 30 Jeep front---RIP
1991 Exploder 6 inch lift 33's---RIP
1989 Bronco II Stock with 32 BFG KM1's
1991 Exploder 6 inch lift 33's---RIP
1989 Bronco II Stock with 32 BFG KM1's
-
vabronconut
- Posts: 268
- Joined: Thu Mar 20, 2008 4:04 am
- Location: CENTREVILLE, VA
Re: dana 35
if you do this swap try doing a write up on here so that other people can see.
87 bronco II 93 5.0 HO, NP435, 44 sas