Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
rockcrawlerbronco2
Posts: 57 Joined: Sun Jan 07, 2007 8:31 pmLocation: monroe,wa
Post
by rockcrawlerbronco2 Sat Oct 06, 2007 8:16 pm
what throttle cable will work on my injected h.o.? the stock one wont work and the mustang wouldnt either.
Nobody
Posts: 2233 Joined: Sun Apr 18, 2004 6:38 pmLocation: Stanwood, WA.
Contact:
Post
by Nobody Sat Oct 06, 2007 8:48 pm
I'd try to use a stock cable, either the stock 5.0L or the stock Bronco II/Ranger. There were couple different lengths available for the Ranger/Bronco II. If all else fails, I believe Lokar makes cables for this conversion.
EBSTEVE
Posts: 291 Joined: Mon Apr 26, 2004 8:10 am
Post
by EBSTEVE Sun Oct 07, 2007 8:48 am
I used the stock cable out of the car when I did my conversion to the EB.
Ranger 5.o, needing another project like Rosie O'Donnell needs another M&M.
