dual shock mounts

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
gary6
Posts: 20
Joined: Mon Jul 16, 2007 9:07 am
Location: las vegas nv

dual shock mounts

Post by gary6 »

i have been looking hi and low for a dual shock mounts for an 88 fbII 4x4 and not one to be found, james duff carrys one but i do not like there products can anyone help me out in finding a set of dual front shock mounts for an 1988 BRONCO II 4X4 with out going to james duff, will a F-150 SET WORK ON MY BRONCO II thanks for any help
greenmachine89
Posts: 142
Joined: Sat Sep 30, 2006 9:44 pm
Location: Battle Ground, WA
Contact:

Post by greenmachine89 »

Most that I have seen tend to locate their at home bracket on the opposite side of the spring. James Duff is the best I've seen so far.
1989 Bronco II 8.8 rear Dana 30 Jeep front---RIP
1991 Exploder 6 inch lift 33's---RIP
1989 Bronco II Stock with 32 BFG KM1's
User avatar
Joel H
Posts: 137
Joined: Mon Feb 13, 2006 11:08 am
Location: Randolph Manitoba

Post by Joel H »

Image
User avatar
Joel H
Posts: 137
Joined: Mon Feb 13, 2006 11:08 am
Location: Randolph Manitoba

Post by Joel H »

You are stuck making your own or you can check the other sites for someone selling.

There is the Dual shock Hook coil bucket from Duff Someone is selling and there is another guy that is selling the old Hoop setup with shocks.

Just have to look around.

Don't expect someone else to find parts for you.

Have you checked with skyjacker? They used to have one.
gary6
Posts: 20
Joined: Mon Jul 16, 2007 9:07 am
Location: las vegas nv

Post by gary6 »

Joel H wrote:You are stuck making your own or you can check the other sites for someone selling.

There is the Dual shock Hook coil bucket from Duff Someone is selling and there is another guy that is selling the old Hoop setup with shocks.

Just have to look around.

Don't expect someone else to find parts for you.

Have you checked with skyjacker? They used to have one.
i have already made the mounts and installed the shocks i dont expect anyone to find them for me just some places to look
Post Reply