Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
-
Alrebel_09
- Posts: 19
- Joined: Fri Dec 08, 2006 2:41 pm
Post
by Alrebel_09 »
has anyone every made homemade radius arms. what dimensions did you use. if you have any pics i would like to see them.
-
Joel H
- Posts: 137
- Joined: Mon Feb 13, 2006 11:08 am
- Location: Randolph Manitoba
Post
by Joel H »
From scratch, all new.
Ya ya the heims are what I started with and have since gone back to the stock bushings.
-
Alrebel_09
- Posts: 19
- Joined: Fri Dec 08, 2006 2:41 pm
Post
by Alrebel_09 »
what size lift are you running and how is the articulation with the custom radius arms
-
Joel H
- Posts: 137
- Joined: Mon Feb 13, 2006 11:08 am
- Location: Randolph Manitoba
Post
by Joel H »
Alrebel_09 wrote:what size lift are you running and how is the articulation with the custom radius arms
around a 4.5" lift.
It's OK
-
Alrebel_09
- Posts: 19
- Joined: Fri Dec 08, 2006 2:41 pm
Post
by Alrebel_09 »
were did you mount your brackets because i got under my truck and measured for some radius arms and the transfer case crossmember is in the way
