Ultra budget lift kit.

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
decible01
Posts: 7
Joined: Sun May 13, 2007 4:21 pm

Ultra budget lift kit.

Post by decible01 »

I'm new to the forum. I just got my Bronco II. Sole purpose for offroading. WHen I bought it it has a ghetto lift kit. Blocks in the back, and hockey pucks up front. Now I heard that there were some gm shackles that give you like a 2" lift in the rear. I also heard that explorer springs give about the same up front. How true is this. And does anyone know of any other cheap lift options?


Thanks in advance

Jeremy
texastud1983
Posts: 59
Joined: Sun Sep 17, 2006 10:40 am
Location: new caney, texas
Contact:

Post by texastud1983 »

If your looking for cheap you can find lift shackles or a small cheese lifts on ebay. Type in ranger shackles or bronco II lifts.
But you get what you pay for. You might get the height but not the performance.
mikhail
Posts: 4
Joined: Wed May 23, 2007 10:48 pm

Post by mikhail »

dont mean to thread jack but i have a 88 bronco II, and im looking for the same thing. i need a really cheap lift about 3-4".

do you know which gm springs are the ones that work? and would a ranger shackle lift work on a B2?
_________________
1988 Bronco II
Paul
Posts: 231
Joined: Tue May 01, 2007 4:57 am
Location: Marysville, Indiana
Contact:

Post by Paul »

http://www.broncoii.org/techpages/xsprings/index.html

you should c heck this link if your looking for some lift cheap, i know its not four inches but it is a start, and you will probably find that it will be an improvement regardless..... also you should be able to do this fairly cheap if you check the junkyards for these items.
Paul
Posts: 231
Joined: Tue May 01, 2007 4:57 am
Location: Marysville, Indiana
Contact:

Post by Paul »

http://www.roughcountry.com/ford_83-97_midsize.htm

or if you want to spend a little more than that check this link ...... it will accomodate 4 inches of lift to your Bronco II
Post Reply