Pull motor...then transfer case..tranny. Or vice-versa.

Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
Post Reply
bower100
Posts: 106
Joined: Fri Feb 24, 2006 7:31 pm
Location: Wilmington,De

Pull motor...then transfer case..tranny. Or vice-versa.

Post by bower100 »

Since I'm pulling the whole drivetrain, should I work on the transfer case first, then tranny and pull the motor last? (The motors just about ready to come out).

Thanks, dave

Oh and, we have an "official" transmission jack at work I could borrow. Would it be a big help, or will my regular Lincoln floor jack be good enough?
Top
User avatar
Nobody
Posts: 2233
Joined: Sun Apr 18, 2004 6:38 pm
Location: Stanwood, WA.
Contact:
Contact Nobody

Post by Nobody »

Pull it all together! Seriously.
Top
bower100
Posts: 106
Joined: Fri Feb 24, 2006 7:31 pm
Location: Wilmington,De

Post by bower100 »

Thanks again. I'm gonna try that.
Top
Post Reply

Return to “Bronco Tech”