Ask technical questions about your Ford Bronco II here. Technical write-ups on your axle swaps, engine swaps, chop tops, etc. are encouraged.
ebi
Posts: 2 Joined: Sun Mar 04, 2007 7:10 pm
Post
by ebi » Sun Mar 04, 2007 7:17 pm
i have heard that xj coils can be used to lift the front of a b2, is this true and if so is it stock coils being used or aftermarket?
Nobody
Posts: 2233 Joined: Sun Apr 18, 2004 6:38 pm
Location: Stanwood, WA.
Contact:
Post
by Nobody » Sun Mar 04, 2007 7:20 pm
I've heard of them being used. Pretty sure aftermarket, but I think they are way too soft for a TTB front end. Maybe someone else knows different.
rockcrawlerbronco2
Posts: 57 Joined: Sun Jan 07, 2007 8:31 pm
Location: monroe,wa
Post
by rockcrawlerbronco2 » Mon Mar 05, 2007 9:32 pm
i am currently running xj 8 inch coils in the front of mine with the sas. they work great. ive transfered them through two rigs and they have only sacked down about and inch.iv beat them pretty hard with v8 power
ebi
Posts: 2 Joined: Sun Mar 04, 2007 7:10 pm
Post
by ebi » Mon Mar 05, 2007 11:31 pm
what about using them in a stock truck to lift me up?
steiner_5000
Posts: 66 Joined: Mon Dec 04, 2006 12:49 pm
Post
by steiner_5000 » Tue Mar 06, 2007 4:42 am
I have heard you can use F-150 springs to lift it up a couple of inches. I think they are stiffer thogh. didn't know if this would help any.